Chain Link Fence Repair

Chain Link Fence Repair in Edmond

Chain link is the workhorse of Edmond back yards, and it rarely fails at the part people blame. The galvanized mesh itself usually outlives everything around it. What gives out is the top rail, the tension bands, and the bottom wire that hold the fabric tight, plus the line posts that rust at the ground. Jointhehoop repairs the hardware and the frame so the mesh pulls flat and taut again instead of bagging into a sag your dog can push through.

Why the Frame Comes First

A loose chain link fence is almost always a tension problem, not a mesh problem. When the bands corrode or the top rail bends, the fabric slackens and starts to roll. We restretch the mesh only after we have replaced the failed rail and reset the tension bar, because a re-stretch over bad hardware slackens again within weeks. Fix the frame, and the fabric stays put.

What We Fix

• Sagging and rolled mesh. We restretch the fabric to proper tension once the frame that holds it is sound.
• Bent and rusted top rail. A dented or corroded top rail lets everything droop. We swap the affected lengths.
• Failed tension bands and wire. Rusted bands and broken bottom wire get replaced so the mesh anchors tight.
• Leaning line and terminal posts. Posts that rust at grade near Sooner Rd get reset in a fresh concrete footing.

Our Process

We check the tension hardware and posts, walk the run with you, and give you a written price before any work starts. Most chain link repairs finish in a single visit near the 73025 ZIP, and we haul off the old wire and rail.

Call (405) 573-3678 for a free estimate on your chain link fence repair in Edmond.